Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
7.1 The Port Manager in the Standalone Mode 44
7.2 The Device Properties Window in the Standalone Mode 44
8 Connecting via the ETHERNET 45
8.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 45
8.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 46
9 Writing a Configuration 46
Figures
Figure 1: Media Room Components List 5
Figure 2: Driver Database Notice 7
Figure 3: Setting a Working Directory 7
Figure 4: Change Working Directory Window 8
Figure 5: The Driver Manager Window Prior to Installing the Drivers 10
Figure 6: Importing a Kramer Driver File 10
Figure 7: Exporting a Kramer Driver File 11
Figure 8: The Driver Manager Window 12
Figure 9: New Serial Command Window 14
Figure 10: Writing the Serial Commands 15
Figure 11: New IR Command Window 16
Figure 12: Connect to IR Capture Device Window 16
Figure 13: IR Command Area Window 17
Figure 14: IR Emitter Wiring 17
Figure 15: The Sony DVD Player in the RC Command Area 18
Figure 16: The Port Manager Window 19
Figure 17: The Kramer RC Configuration Main Window 20
Figure 18: Using the Toggle 1-2-3-4 Behavior 22
Figure 19: Event Macros Tab 22
Figure 20: The Scheduling Window 23
Figure 21: IR, RS-232 and RS-485 Port RC Command Area 23
Figure 22: LIGHT RC Command Area 24
Figure 23: Relay Port RC Command Area 24
Figure 24: Switcher Port RC Command Area 25
Figure 25: Switcher Port RC Command Area 25
Figure 26: Button Color Port RC Command Area 25
Figure 27: Color Selection Window 26
Figure 28: Ignore Button Port RC Command Area 26
Figure 29: Selecting a Button to Write a Macro 27
Figure 30: Creating a New Command 28
Figure 31: Selecting the Port 28
Figure 32: Labeling the RC Buttons 29
Figure 33: Typing the Label 29
Figure 34: Switch to COMP1 Command 30
Figure 35: LIGHT Command 31
Figure 36: Lights ON RC Command 31
Figure 37: Switcher RC Command 32
Figure 38: High Volume RC Command 33