Owner's manual

Contents
iii
Figure 39: Keypad LCD RC Command 33
Figure 40: Change Color RC Command 34
Figure 41: Select Button Color 35
Figure 42: Ignore RC Command 36
Figure 43: The File Menu 37
Figure 44: The Configuration Setup Window 37
Figure 45: The Edit Menu 38
Figure 46: The Configuration Menu 38
Figure 47: The Device Menu 39
Figure 48: Device Selection Dialog Box 40
Figure 49: Device Properties Window 40
Figure 50: The Help Menu 40
Figure 51: Load Firmware Upgrade Window (SV-551) 41
Figure 52: Connect Window 41
Figure 53: Load Firmware Upgrade Window (RC-6x) 42
Figure 54: Transforming to the Standalone Configuration 43
Figure 55: Standalone Device Description 43
Figure 56: The Port Manager in the Standalone Mode 44
Figure 57: The Device Properties Window in the Standalone Mode 44
Figure 58: Local Area Connection Properties Window 45
Figure 59: Internet Protocol (TCP/IP) Properties Window 46
Figure 60: Loading a Configuration 47
Tables
Table 1: Room Controller Commands Available 3
Table 2: Driver Manager Window Features 13
Table 3: Connectors Available for Driver Commands 14
Table 4: The Port Manager Window Features 19
Table 5: Kramer RC Configuration Window Features 20
Table 6: IR, RS-232 and RS-485 Port Command Area Features 24
Table 7: File Menu Features 37
Table 8: Edit Menu Features 38
Table 9: Configuration Menu Features 38
Table 10: Device Menu Features 39
Table 11: Connect Dialog Box 39
Table 12: Connect Dialog Box 40
Table 13: Help Menu Features 40