Owner's manual

The Kramer RC Configuration Menus
37
6 The Kramer RC Configuration Menus
This section describes the Kramer RC Configuration menus.
6.1 The File Menu
Figure 43 illustrates the File menu and Table 7 defines it:
Figure 43: The File Menu
Table 7: File Menu Features
Menu Command
Function
New Project Click to create a new
configuration setup, see
Figure 44
1
Open Project
.
Open an existing
configuration setup
Save Project Click to save the current
configuration (does not
save the relevant driver
commands).
Save as Project Save the configuration
under a different name
Load Configuration… Click to load a saved
configuration.
Driver Manager … Click to open the Driver
Manager window (see
section
4.2.2).
Change Working
Directory…
Click to set the new
working directory
2
Exit
.
Click to exit the program.
Figure 44: The Configuration Setup Window
1 This will discard the active configuration
2 The working directory can be changed at any time