Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Kramer RC Configuration Menus
40
Figure 48: Device Selection Dialog Box
Serial Select Port: select the
communication port
6.4.2 The Device Properties Dialog Box
To connect a device, open the Device menu and click Properties. The Device
Properties window Appears (see
Figure 49). Figure 57 shows the Device
Properties window in the standalone setup.
Figure 49: Device Properties Window
Table 12: Connect Dialog Box
Feature
Function
Name, IP, Gateway,
Mask
If required, change information.
Model, Serial number,
Port, Firmware, K-Net-
ID, MAC,
Displays information.
DHCP44F
1
Enabled Check box to enable operation in
the DHCP mode.
When in the DHCP mode, you
can only change the name of the
device.
This process may take several
minutes and will cause an
automatic restart on the device.
6.5 The Help Menu
Figure 50 illustrates the Help menu and Table 13 defines it:
Figure 50: The Help Menu
Table 13: Help Menu Features
Menu Command
Function
Check for updates Search the Kramer
Electronics Web site for
software updates.
About Kramer RC
Configuration
Shows the current software
version.
1 Dynamic Host Configuration Protocol: Allows the network administrator to distribute IP addresses from a central point and
automatically send a new IP address when an Ethernet point is plugged into a different network location