Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Initial Planning
4
Before you operate the RC system:
• Import the drivers of the peripheral devices
• Configure your system
1
• Write the configuration
1
• Install the room controller system
2.1 System Requirements for the Kramer RC-SV Configuration
Software
This section describes the system requirements for the Kramer RC
Configuration software.
2.1.1 System Requirements
The system requirements include:
• 400MHz processor
• 128MB RAM
• At least 300MB free hard disk space
• Microsoft® Internet Explorer 6.0
• Network connection for configuring devices or USB
• Microsoft.NET® Framework 2.0 Service Pack 1, automatically installed
(see section
4.1)
2.1.2 Operating Systems
Microsoft® Windows XP® is the recommended operating system
2
3 Initial Planning
.
Carefully plan your RC system layout to ensure a smooth and easy
configuration and installation (refer to the separate User Manuals
3
• Defining your requirements
), by:
• Listing the peripheral devices and room items that will be included in the
system
• Planning the location of each device
• Planning the function of each device
Make a detailed list of the functions and commands required of the system
devices, as illustrated in the partial list in
Figure 1:
1 The SV-551 for the SummitView™ system and the RC-6x for the standalone setup
2 Windows NT does not support .NET 2.0.
3 Download up-to-date Kramer user manuals and guides from the Internet at this URL: http://www.kramerelectronics.com