K R A ME R E LE CT R O N IC S L T D .
Contents 1 Introduction 1 2 Getting Started 2 3 Overview 3 4 4.1 4.2 4.3 Defining the SWM-1 Loudspeaker Wall Mount Device Wall Mount Parts The Loudspeaker Interface Kit The Wall Fixing Kit 4 4 5 5 5 5.1 5.2 5.3 5.4 5.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • i Review the contents of this user manual Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
3 Overview The Kramer SWM-1 is a versatile device for wall-mounting loudspeakers. The SWM-1: • Is designed for cabinet loudspeakers weighing up to 5kg (11lbs) • Mounts the loudspeaker 72mm (2.8”) from the wall • Is suitable for single point, dual point and keyhole fixings • Distance between dual point fixings is 51mm – 67mm (2” – 2.
4 Defining the SWM-1 Loudspeaker Wall Mount Device Each SWM-1 package includes a pair of loudspeaker wall mounts. The following sections define the parts of one (of two) wall mount kit. 4.1 Wall Mount Parts i You need to disassemble the SWM-1 before installing it.
4.2 The Loudspeaker Interface Kit The loudspeaker interface screws are used to attach the wall mount to the loudspeaker. Use the screws in the kit that fit the hole threading on the loudspeakers. 4.3 # A Part per Unit M5x12mm Screw (2) B M6x12mm Screw (2) C UNC 1/4”x5/8” Screw (2) D M4.2x19mm (No.8x3/4”) Wood Screw (2) E Keyhole insert (1) The Wall Fixing Kit Use the wall fixing screws and wall plugs to fix the wall mount with the loudspeaker to the wall. # A1 Parts per Unit M4.
5 Installing the SWM-1 This section describes how to install the SWM-1. i 5.1 The following instructions refer to the installation of one unit. Preparing for Installation Before installing the loudspeakers, check that you have all the required tools: 5.
Dual Insert: Connect the ball interface to the adapter interface using an M6x12mm screw, and then connect them to the two holes on the loudspeaker rear panel, using screw types A, B or C (see Section 4.2). Keyhole Insert: Insert the M5x12mm screw through the hole in the ball interface and tighten with the keyhole insert. Insert the screw head into the keyhole and push it upwards. No Inserts Available: Connect the ball interface to the adapter interface using an M6x12mm screw, and then use the two M4.
5.
5.4 Wall Mounting the SWM-1 You can mount the SWM-1 either on a brick or concrete wall or wood/wood stud walls.
5.
6 Technical Specifications MATERIALS: Metal, plastic, aluminum MAXIMUM SPEAKER WEIGHT: 5kg (11lbs) per speaker AVAILABLE COLORS: Black and white DIMENSIONS: 88mm x 79mm x 72mm (3.5” x 3.1” x 2.8”), W, D, H WEIGHT: One wall mount: 0.19kg (0.42lbs) approx. Shipping weight (for pair): 0.55kg (1.21lbs) approx. Specifications are subject to change without notice at http://www.kramerelectronics.
LIMITED WARRANTY We warrant this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for one year from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
