User Manual

6 SWM-1 - Installing the SWM-1

5 Installing the SWM-1

This section describes how to install the SWM-1.

The following instructions refer to the installation of one unit.

5.1 Preparing for Installation

Before installing the loudspeakers, check that you have all the required tools:

• Crosshead/Flathead screwdriver

• Power drill

• 6mm (1/4") masonry bit or 3mm (1/8") wood bit

• Pencil

• Level and stud finder (optional)

5.2 Attach the Ball Interface to the Loudspeaker Rear Panel

This section describes several methods in which you can attach the SWM-1 Ball

Interface to the rear side of the loudspeaker. Choose the method that fits best to

your loudspeaker:

One Insert:

Connect the ball interface to the

single hole on the loudspeaker rear

panel using screw types A, B or C

(see

Section 4.2