Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 4 5 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps. Step 1: Connect the inputs/outputs - see section 5 1 Connect the inputs 2 Connect the outputs 1 2 VGA N .
Overview 3 Overview The TP-102HD is a twisted pair transmitter for computer graphics video 1 and HDTV 2 signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to two identical twisted pair signals.
Your TP-102HD XGA/HD Line Transmitter/DA connected to a ground terminal on the units at both ends (use the ground terminal of the power supply connection if necessary). For a CAT 5 cable exceeding a distance of 50m, separate power supplies should be connected to the transmitter and to the receiver simultaneously. 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) We recommend that you use Shielded Twisted Pair (STP) cable.
Your TP-102HD XGA/HD Line Transmitter/DA 4 1 3 2 2 3 1 4 5 Figure 1: TP-102HD XGA/HD Line Transmitter/DA Table 1: TP-102HD XGA/HD Line Transmitter/DA Features # Feature 1 12V DC 2 LINE OUT 2 RJ-45 Connector 3 LINE OUT 1 RJ-45 Connector 4 5 XGA IN 15-pin HD Connector ON LED Function +12V DC connector for powering the unit Connects to1 the LINE IN RJ-45 connector on the (second) TP-120 XGA Line Receiver 2 Connects to 1 the LINE IN RJ-45 connector on the (first) TP-120 XGA Line Receiver 2 Connect
Your TP-102HD XGA/HD Line Transmitter/DA Figure 2 and Table 2 define the TP-102HD underside panel: 1 2 Figure 2: TP-102HD (Underside Panel) Table 2: TP-102HD (Underside Panel) Features # Feature 1 VS Switch 2 HS Switch Function Slide the switch to the left (to NORMAL) to retain the polarity; slide the switch 1 to the right to change the VS polarity to NEGATIVE polarity 2 Slide the switch to the left (to NORMAL) to retain the polarity; slide the switch to the right1 to change the HS polarity to NEGATIV
Configuring a 1:2 XGA/HD-to-Twisted Pair DA System 5 Configuring a 1:2 XGA/HD-to-Twisted Pair DA System You can use the TP-102HD XGA/HD Line Transmitter/DA with two TP-120 XGA Line Receiver units 1 to configure a 1:2 XGA/HD to twisted pair DA system that transmits a computer graphics/HD signal to two displays via long line CAT 5 UTP cabling. To connect the TP-102HD to two TP-120 units, as the example in Figure 3 illustrates, do the following: 1.
Configuring a 1:2 XGA/HD-to-Twisted Pair DA System Figure 3: Configuring a 1:2 XGA/HD to Twisted Pair Transmitter/Receiver/DA 8 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications 5.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
