Owner's manual

Your Line Transmitters and Presentation Controllers
11
Table 5: TP-120 XGA Line Receiver Features
# Feature Function
1 LINE IN RJ-45 Connector
Connects to the LINE OUT RJ-45 connector on the TP-107V
2 XGA OUT HD15F Connector Connect to the XGA acceptor
3 12V DC +12V DC connector for powering the unit
4 EQ.
1
Trimmer Adjusts
2
the cable compensation equalization level
5 LEVEL Trimmer Adjusts
2
the output signal level
6 ON LED Illuminates when receiving power
Figure 6 and Table 6 define the underside of the TP-120 XGA Line Receiver:
Figure 6: TP-120 XGA Line Receiver (Underside)
Table 6: TP-120 XGA Line Receiver (Underside) Features
# Feature Function
1 H SYNC Switch Slide the switch down to retain the polarity
Slide the switch up
3
to change the H SYNC polarity
2 V SYNC Switch Slide the switch down to retain the polarity
Slide the switch up
3
to change the V SYNC polarity
1 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
3 By default, both switches are set down for normal V SYNC and H SYNC polarity