Owner's manual

Overview
5
PC
 
PC

PC
 
PC
  
PC

PC

TP-12 0
Pr oj ect or
TP-107 V
PC
PC
T P-107V
TP- 107V
TP-107V
TP-107V
TP-107V
TP-107V
RC-108
TP-107V
XGA
C AT 5
K-N ET
C-STP+K NET-6
Figure 1: TP-107V / TP-120 Kit
The TP-107V includes a:
 LINE IN CAT 5 connector, that connects to the LINE OUT CAT 5
connector on the previous Line Transmitter
 LINE OUT CAT 5 connector, that connects to a receiver (for example, the
TP-120) or to the next Line Transmitter in the chain
 CONTROL set of dipswitches
In addition, the TP-107V:
 Can be controlled via RS-485
 Has a resolution of up to UXGA
 Can change the polarity of decoding H and V Sync for video
 Can be upgraded via RS-232 and is 12VDC fed
The TP-120:
 Has an operating range of more than 300ft. (more than 100 meters)
 Includes EQ. and level controls
 Has the power connect feature
1
and is 12V DC fed
1 Powering via the CAT 5 cable from either the receiver or the transmitter is good for 100 meters. Above it, both sides should
be fed with power