Owner's manual

Flash Memory Upgrade

6. The Open File window opens. Select the correct HEX file that

contains the updated version of the firmware for RC-108 (for example

44M_V1p2.hex) and click Open.

7. Press the keyboard shortcut key F3 (or select the

“Communication/RS232” command from the Settings menu, or press

the keys: Alt SCR).

The “RS232” window appears. Change the COM port according to the

configuration of your computer and select the 9600 baud rate:

Figure 22: RS-232 Window

8. Click Connect.

In the “Atmel – Flip” window, in the Operations Flow column, the

Run button is active, and the name of the chip appears as the name of

the third column: AT89C51RD2.

Verify that in the Buffer Information column, the

“HEX File: RC108.hex” appears.

Figure 23: Atmel – Flip Window (Connected)