Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 3.4 4 4.1 4.2 4.3 4.4 5 5.1 5.2 5.3 5.4 6 6.1 6.2 6.3 6.4 6.5 7 7.1 7.2 7.3 7.4 7.
Contents Figures Figure 1: PT-110-od XGA Line Transmitter Figure 2: TP-120-od XGA Line Receiver Figure 3: Connecting the PT-110-od to the TP-120-od Figure 4: TP-121-od XGA / Audio Line Transmitter Figure 5: TP-122-od XGA / Audio Line Receiver (Topside) Figure 6: Connecting the TP-121-od and the TP-122-od Figure 7: TP-123-od XGA / Audio / Data Line Transmitter Figure 8: TP-124-od XGA / Audio / Data Line Receiver (Topside) Figure 9: Connecting the TP-123-od and the TP-124-od Figure 10: RS-232 PINOUT Connecti
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview Kramer’s new “od” (Overvoltage Defense) family of twisted pair transmitters and receivers for computer graphics video now includes electromagnetic pulse (EMP) protection. The electro-magnetic pulse of nearby lightning strikes can damage sensitive electronic equipment by inducing high momentary surge voltages. Systems with outdoor runs of signal cable are very susceptible to EMP damage.
Overview Although Unshielded Twisted Pair (UTP) cable might be preferred for long range applications, the UTP cable should be installed far away from electric cables, motors and so on, which are prone to create electrical interference. However, since the use of UTP cable might cause inconformity to electromagnetic standards, Kramer does not commit to meeting the standard with UTP cable. 3.2 About the Power Connect™ Feature The Power Connect feature applies as long as the cable can carry power.
The PT-110-od / TP-120-od Transmitter / Receiver Set 4 The PT-110-od / TP-120-od Transmitter / Receiver Set The Kramer Pico TOOLS PT-110-od is an XGA line transmitter that receives an XGA signal (up to UXGA), converts it to a twisted pair signal, and transmits it over a CAT 5 cable to the Kramer TOOLS TP-120-od receiver which converts it back to an XGA signal. Together the PT-110-od and TP-120-od form a computer graphics transmitter/receiver system.
The PT-110-od / TP-120-od Transmitter / Receiver Set 4.
The PT-110-od / TP-120-od Transmitter / Receiver Set 4.2 Your TP-120-od XGA Line Receiver Figure 2 and Table 2 define the TP-120-od XGA Line Receiver: Figure 2: TP-120-od XGA Line Receiver Table 2: TP-120-od XGA Line Receiver Features # Feature 1 12V DC 2 XGA OUT 15-pin HD (F) Connector 3 LINE IN RJ-45 Connector 4 5 6 EQ.
The PT-110-od / TP-120-od Transmitter / Receiver Set 4.3 Connecting the PT-110-od / TP-120-od Transmitter / Receiver You can use the PT-110-od XGA Line Transmitter together with the TP-120-od XGA Line Receiver to configure an XGA-to-Twisted Pair Transmitter and Receiver system.
The PT-110-od / TP-120-od Transmitter / Receiver Set Figure 3: Connecting the PT-110-od to the TP-120-od 9
The PT-110-od / TP-120-od Transmitter / Receiver Set 4.4 Technical Specifications of the PT-110-od and the TP-120-od Table 3 includes the technical specifications 1 of the PT-110-od and the TP-120-od: Table 3: Technical Specifications 2 of the PT-110-od and the TP-120-od INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH: RESOLUTION: DIFF.
The TP-121-od / TP-122-od Transmitter / Receiver Set 5 The TP-121-od / TP-122-od Transmitter / Receiver Set The Kramer TOOLS TP-121-od is an XGA / audio stereo line transmitter. It receives an XGA signal and an unbalanced stereo analog audio signal 1 converts them to a twisted pair signal and transmits them over CAT 5 cable to the Kramer TOOLS TP-122-od.
The TP-121-od / TP-122-od Transmitter / Receiver Set 5.1 Your TP-121-od XGA / Audio Line Transmitter Figure 4 and Table 4 define the TP-121-od: Figure 4: TP-121-od XGA / Audio Line Transmitter Table 4: TP-121-od XGA / Audio Line Transmitter Features 1 2 3 # Feature 12V DC AUDIO IN 3.
The TP-121-od / TP-122-od Transmitter / Receiver Set 5.2 Your TP-122-od XGA / Audio Line Receiver Figure 5 and Table 5 define the TP-122-od XGA / Audio Line Receiver topside: Figure 5: TP-122-od XGA / Audio Line Receiver (Topside) Table 5: TP-122-od XGA / Audio Line Receiver (Topside) Features # 1 2 3 4 5 6 7 8 9 Feature 12V DC S/PDIF RCA Connector ANALOG 3.5mm Mini Jack LINE IN RJ-45 Connector XGA OUT 15-pin HD (F) Connector LINK LED LEVEL Trimmer EQ.
The TP-121-od / TP-122-od Transmitter / Receiver Set 5.3 Connecting the TP-121-od / TP-122-od Transmitter / Receiver You can use the TP-121-od together with the TP-122-od to configure an XGA/Audio Line-to-Twisted Pair Transmitter and Receiver system.
The TP-121-od / TP-122-od Transmitter / Receiver Set Figure 6: Connecting the TP-121-od and the TP-122-od 15
The TP-121-od / TP-122-od Transmitter / Receiver Set 5.4 Technical Specifications of the TP-121-od and the TP-122-od Table 6 includes the technical specifications 1 of the TP-121-od and the TP-122-od. Table 6: Technical Specifications 2 of the TP-121-od and the TP-122-od INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): RESOLUTION: DIFF. GAIN: DIFF.
The TP-123-od / TP-124-od Transmitter / Receiver Set 6 The TP-123-od / TP-124-od Transmitter / Receiver Set The TP-123-od is a high-performance transmitter. It accepts a computer graphics input signal, an unbalanced stereo analog audio signal 1, unidirectional (RxD) RS-232 control commands and 12V DC power, over CAT 5 cable, and transmits to the TP-124-od. The TP-123-od can power or be powered by the TP-124-od transmitter over the same CAT 5 cable and is 12V DC fed.
The TP-123-od / TP-124-od Transmitter / Receiver Set 6.1 Your TP-123-od XGA / Audio / Data Line Transmitter Figure 7 and Table 7 define the TP-123-od: Figure 7: TP-123-od XGA / Audio / Data Line Transmitter Table 7: TP-123-od XGA / Audio / Data Line Transmitter Features # 1 2 3 4 5 6 Feature 12V DC AUDIO IN 3.
The TP-123-od / TP-124-od Transmitter / Receiver Set 6.2 Your TP-124-od XGA / Audio Line Receiver Figure 8 and Table 8 define the TP-124-od XGA / Audio / Data Line Receiver: Figure 8: TP-124-od XGA / Audio / Data Line Receiver (Topside) Table 8: TP-124-od XGA / Audio / Data Line Receiver (Topside) Features # 1 2 3 4 5 6 7 8 9 10 Feature 12V DC AUDIO OUT S/PDIF RCA Connector ANALOG 3.
The TP-123-od / TP-124-od Transmitter / Receiver Set 6.3 Connecting the XGA / Audio / Data Line Transmitter / Receiver You can use the TP-123-od XGA / Audio / Data Line Transmitter together with the TP-124-od XGA / Audio / Data Line Receiver to configure a twisted pair transmitter and receiver system, to transmit the video, audio and RS-232 control signals via CAT 5 cable.
The TP-123-od / TP-124-od Transmitter / Receiver Set 4. Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity on both 1 the TP-123-od and the TP-124-od. 5. If required, on the TP-124-od adjust 2 the video output signal level and/or cable compensation equalization level.
The TP-123-od / TP-124-od Transmitter / Receiver Set 6.
The TP-123-od / TP-124-od Transmitter / Receiver Set 6.5 Technical Specifications of the TP-123-od and the TP-124-od Table 10 includes the technical specifications 1 of the TP-123-od and the TP-124-od: Table 10: Technical Specifications 2 of the TP-123-od and the TP-124-od INPUTS: OUTPUTS: TP-123-od VIDEO: 1 VGA / UXGA on a 15-pin HD connector AUDIO: 1 analog unbalanced stereo audio on a 3.
The TP-125-od / TP-126-od Transmitter / Receiver Set 7 The TP-125-od / TP-126-od Transmitter / Receiver Set The Kramer TOOLS TP-125-od is a high-performance transmitter that accepts a computer graphics input signal, an unbalanced stereo analog audio signal and RS-232 control commands. The stereo analog audio signal is converted to the digital audio (S/PDIF) stream before transmitting, thus preserving the quality of the audio source signals.
The TP-125-od / TP-126-od Transmitter / Receiver Set 7.1 Your TP-125-od XGA / Audio / Data Line Transmitter Figure 11 and Table 11 define the TP-125-od: Figure 11: TP-125-od XGA / Audio / Data Line Transmitter Table 11: TP-125-od XGA / Audio / Data Line Transmitter Features 1 2 3 4 # Feature 12V DC AUDIO IN 3.
The TP-125-od / TP-126-od Transmitter / Receiver Set 7.2 Your TP-126-od XGA / Audio / Data Line Receiver Figure 12 and Table 12 define the TP-126-od: Figure 12: TP-126-od XGA / Audio / Data Line Receiver Table 12: TP-126-od XGA / Audio / Data Line Receiver Features # 1 2 3 4 5 6 7 8 9 10 Feature 12V DC AUDIO S/PDIF RCA connector OUT ANALOG 3.5mm Mini Jack RS-232 Terminal Block Connector LINE IN RJ-45 Connector XGA OUT 15-pin HD (F) Connector LINK LED LEVEL Trimmer EQ.
The TP-125-od / TP-126-od Transmitter / Receiver Set 7.3 Connecting the TP-125-od and TP-126-od You can use the TP-125-od XGA / Audio / Data Line Transmitter together with the TP-126-od XGA / Audio / Data Line Receiver1 to configure a twisted pair transmitter and receiver system, to transmit the video, audio and RS-232 control signals via CAT 5 cable.
The TP-125-od / TP-126-od Transmitter / Receiver Set 4. Connect the 12V DC power supply to the power socket and connect the adapter to the mains electricity on both the TP-125-od and the TP-126-od. 5. If required, on the TP-126-od adjust the video output signal level and/or cable compensation equalization level with a screwdriver.
The TP-125-od / TP-126-od Transmitter / Receiver Set 7.
The TP-125-od / TP-126-od Transmitter / Receiver Set 7.5 Technical Specifications Table 14 includes the technical specifications 1 of the TP-125-od and the TP-126-od. Table 14: Technical Specifications 2 of the TP-125-od 3 and the TP-126-od TP-125-od TP-126-od VIDEO: 1 UXGA on a 15-pin HD 1 RJ-45 connector connector AUDIO: 1 analog unbalanced stereo audio on a 3.
Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 8 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Table 15 and Figure 15 define the UTP CAT 5 PINOUT, using a straight pin to pin cable with RJ-45 connectors: Table 15: CAT 5 PINOUT EIA /TIA 568A PIN 9 EIA /TIA 568B Wire Color Green / White Green Orange / White Blue Blue / White Orange Brown / White Brown 1 2 3 4 5 6 7 8 Wire Color Orange / White Orange Green / White Blue Blue / White Green Brown / White Brown Pair 1 4 and 5 Pair 1 4 and 5
Acquiring the EDID 1. On the Transmitter, connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity. 2. Press the EDID CAPTURE button. 3. Once the EDID STATUS blinks rapidly several times, the default EDID is captured. Alternatively, you can press the EDID CAPTURE button after connecting the transmitter receiver system. When the EDID STATUS LED blinks rapidly several times, the default EDID information is acquired.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution PN: 2900- 000637 Rev: 4 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
