User manual

The PT-110-od / TP-120-od Transmitter / Receiver Set
7
4.2 Your TP-120-od XGA Line Receiver
Figure 2
and Table 2 define the TP-120-od XGA Line Receiver:
Figure 2: TP-120-od XGA Line Receiver
Table 2: TP-120-od XGA Line Receiver Features
# Feature Function
1
12V DC
+12V DC connector for powering the unit
2 XGA OUT 15-pin HD (F) Connector Connect to the XGA acceptor
3 LINE IN RJ-45 Connector Connects to the LINE OUT RJ-45 connector on the
PT-110-od (see section 8
)
4 EQ.
1
Trimmer Adjusts
2
the cable compensation equalization level
5 LEVEL Trimmer Adjusts
2
the output signal level
6 ON LED Illuminates when receiving power
1 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level