User manual

The TP-123-od / TP-124-od Transmitter / Receiver Set
23
6.5 Technical Specifications of the TP-123-od and the TP-124-od
Table 10
includes the technical specifications
1
of the TP-123-od and the
TP-124-od:
Table 10: Technical Specifications
2
of the TP-123-od and the TP-124-od
TP-123-od TP-124-od
INPUTS: VIDEO: 1 VGA / UXGA on a 15-pin HD
connector
AUDIO: 1 analog unbalanced stereo
audio on a 3.5mm mini jack
1 RJ-45 connector
OUTPUTS: 1 RJ-45 connector VIDEO: 1 VGA / UXGA on a 15-pin HD
connector
AUDIO:
1 audio S/PDIF on an RCA connector
1 analog unbalanced stereo audio on a
3.5mm mini jack
MAX. OUTPUT LEVEL: VIDEO: 1.8V; AUDIO: 2.9Vpp
RS-232 BAUD RATE: Up to 19200kbps
BANDWIDTH (-3dB): VIDEO: 150MHz; AUDIO: 19kHz
RESOLUTION: Up to UXGA
DIFF. GAIN: 1.3%
DIFF. PHASE: 0.2Deg.
K-FACTOR <0.1%
S/N RATIO VIDEO: 63dB @5MHz; AUDIO: 68dB @1kHz
CROSSTALK (all hostile): VIDEO: -56dB@50MHz into audio
CONTROLS: RS-232 on a 2-pin terminal block
connector
RS-232 0n a 2-pin terminal block
connector
LEVEL: –9.5dB to 2.4dB,
EQ.: 0dB to +32dBm
COUPLING: VIDEO: AC
AUDIO: AC
VIDEO: AC
AUDIO: IN – AC, OUT - DC
AUDIO THD + NOISE: 0.2% @1kHz
AUDIO 2
nd
HARMONIC: 0.01% @1kHz
POWER SOURCE: 12V DC 420mA 12V DC 320mA
DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H
WEIGHT: 0.3kg (0.67lbs) approx.
ACCESSORIES: Power supply
OPTIONS: RK-3T rack adapter
1 The measurements are presented for the transmitter/receiver pair
2 Specifications are subject to change without notice