User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The TP-125-od / TP-126-od Transmitter / Receiver Set
26
7.2 Your TP-126-od XGA / Audio / Data Line Receiver
Figure 12
and Table 12 define the TP-126-od:
Figure 12: TP-126-od XGA / Audio / Data Line Receiver
Table 12: TP-126-od XGA / Audio / Data Line Receiver Features
# Feature Function
1
12V DC
+12V DC connector for powering the unit
2 AUDIO
OUT
S/PDIF RCA connector Connects to the digital audio acceptor
3 ANALOG 3.5mm Mini Jack Connects to the analog audio acceptor
4 RS-232 Terminal Block Connector Connects to the controlled unit (see section 7.4)
5 LINE IN RJ-45 Connector Connects to
1
the LINE OUT RJ-45 connector on the TP-125-od
6 XGA OUT 15-pin HD (F) Connector Connects to the UXGA acceptor
7 LINK LED Illuminates when receiving the correct input signal
8 LEVEL Trimmer Adjusts the output signal level
9 EQ.
2
Trimmer Adjusts the cable compensation equalization level
10 ON LED Illuminates when receiving power
1 Using a UTP cable with CAT 5 connectors at both ends (the PINOUT is defined in Figure 15 and Table 15)
2 Degradation and UXGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals