User guide

TP-121/3/5EDID, PT-110EDID - Your TP-121EDID 7

Figure 1: TP-121EDID XGA/Audio Line Transmitter

Feature

Function

1 EDID CAPTURE Button Press to capture the EDID information from the

display

2 STATUS LED Illuminates during normal operation; flashes when

acquiring the EDID

3 ON LED Illuminates when receiving power

4 XGA IN 15-pin HD (F) connector Connects to the XGA source

5 LINE OUT RJ-45 connector Connects to the LINE IN RJ-45 connector on a

receiver

Using a CAT 5 cable with RJ-45 connectors at both

ends (the PINOUT is defined in Section

6 AUDIO IN 3.5mm mini jack Connects to the audio source

7 12V DC +12V DC connector for powering the unit

4.2 Connecting the TP-121EDID XGA/Audio Line

Transmitter

You can use the TP-121EDID together with the TP-122N to configure a twisted

pair transmitter and receiver system, to transmit the video and audio signals via

CAT 5 cable.

Before connecting the transmitter and receiver system you can

acquire the EDID from the display or set the system to the default

EDID, see Section