Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The 708 Video Audio Line Receiver
10
5.3 Connecting the 708 Video Audio Line Receiver
To connect the 708 as illustrated in the example in Figure 6, do the following:
1. Connect the VIDEO OUT BNC connector to a composite video acceptor
(for example, a display).
2. Connect the AUDIO OUT RCA connector to an unbalanced mono audio
acceptor (for example, an amplifier with speakers).
3. Connect a transmitter to the LINE IN RJ-11 connector.
4. If required, connect the LOOP RJ-11 connector to the LINE IN RJ-11
connector
2
of an additional 708 unit.
5. Connect a 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
6. If required, adjust the EQ (equalization) and VIDEO GAIN levels, by
inserting a screwdriver into each of the small holes and carefully rotating
them.
Display
Amplifier
From
the Transmitter
Figure 6: Connecting the 708 Video Audio Line Receiver