Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-210 XGA Line Transmitter/DA
6
Table 1: Front Panel TP-210 XGA Line Transmitter/DA Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 XGA INPUT 15-pin HD Connector Connects to the video source
3 XGA OUT 2 15-pin HD Connector Connects to the video acceptor 2
4 XGA OUT 1 15-pin HD Connector Connects to the video acceptor 1
5 OUT CAT 5 Connectors Connect to the LINE IN connectors of Line Receivers
1
(from 1 to 10)
6 Power Connector with FUSE AC connector enabling power supply to the unit
The TP-210 underside is illustrated in Figure 2 and defined in Table 2:
Figure 2: TP-210 XGA Line Transmitter/DA Underside View
Table 2: TP-210 XGA Line Transmitter/DA Underside Features
# Feature Function
1 VS Switch To retain the polarity, slide the switch down
2
(to NORM.);
to change the VS polarity to negative polarity, slide the switch up (to NEG.)
2 HS Switch To retain the polarity, slide the switch down
2
(to NORM.);
to change the HS polarity to negative polarity, slide the switch up (to NEG.)
1 Using a cable with CAT 5 connectors at both ends
2 By default, both switches are set to NORM