Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 4 4.1 5 6 6.1 6.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start The quick start chart summarizes the basic setup and operation steps of the TP-210A.
Overview 3 Overview The TP-210A UXGA – Audio – RS-232 Line Transmitter/DA receives a computer graphics signal, an audio signal1 and an RS-232 signal, and distributes them to up to 10 receivers (via CAT 5 cables). The TP-210A also simultaneously distributes the signal to two UXGA outputs, two analog audio outputs or two digital audio outputs, and two RS-232 outputs. The TP-210A serves as a power center that can distribute power to the connected receivers (see section 3.1).
Your TP-210A UXGA – Audio – RS-232 Line Transmitter/DA 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where skewing is not an issue. For cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used.
Your TP-210A UXGA – Audio – RS-232 Line Transmitter/DA Figure 1: TP-210A UXGA – Audio – RS-232 Line Transmitter/DA 5
Your TP-210A UXGA – Audio – RS-232 Line Transmitter/DA Table 1: TP-210A UXGA – Audio – RS-232 Line Transmitter/DA Features # 1 2 3 4 5 6 7 8 9 10 Feature POWER Switch UXGA INPUT 15-pin HD Connector UXGA OUT 15-pin HD Connectors LINE OUTPUT RJ-45 Connectors1 ANALOG AUDIO INPUT 3.5mm Mini Jacks OUT S/PDIF ANALOG Selector Button 4 S/PDIF RCA Connectors 11 INPUT OUT RS-232 Terminal IN (G, Rx) Block Connector OUT (G, Tx1) 12 Power Connector with Fuse 4.
Installing on a Rack 5 Installing on a Rack This section provides instructions for rack mounting the unit.
Connecting the TP-210A 6 Connecting the TP-210A This section describes how to connect the TP-210A (see section 6), wire the CAT 5 LINE OUT RJ-45 Connectors (see section 6.1), and wire the RS-232 connectors (see section 6.1). To connect the TP-210A, as illustrated in Figure 3, do the following 1: 1. Connect a UXGA source (for example, a laptop’s graphics card) to the UXGA INPUT 15-pin HD connector. 2. Connect an analog2 audio source to the Audio IN 3.
Connecting the TP-210A 7. Connect the power cord1. 8. If necessary, set the HS and VS switches2 on the underside.
Connecting the TP-210A 6.
Technical Specifications 7 Technical Specifications Table 4 includes the technical specifications 1 of the TP-210A: Table 4: Technical Specifications of the TP-210A INPUTS: 1 UXGA video on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 RS-232 with 1 RxD line on a terminal block connector. OUTPUTS: 10 twisted pairs on RJ-45 connectors, 2 UXGA on 15-pin HD connectors, 2 unbalanced stereo audio on 3.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000367 Rev: 3 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
