Instruction Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-210A
10
6.1 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors
Table 3
and Figure 4 define the UTP CAT 5 PINOUT, using a straight pin
to pin cable with RJ-45 connectors:
Table 3: CAT 5 PINOUT
Figure 4: CAT 5 PINOUT
EIA /TIA 568A EIA /TIA 568B
PIN Wire Color PIN Wire Color
1 Green/White 1 Orange/White
2 Green 2 Orange
3 Orange/White 3 Green/White
4 Blue 4 Blue
5 Blue/White 5 Blue/White
6 Orange 6 Green
7 Brown/White 7 Brown/White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
6.2 Wiring the RS-232 Connector
Prepare an RS-232 cable with a 9-pin D-sub connector at one end, and a 2-pin
terminal block connector at the other end, as defined in Figure 5
:
Figure 5: RS-232 PINOUT Connection
Rx
PIN 5 Connected to G
PIN 3 Connected to Rx
1
2
3
4
5
6
7
8
9
PC (9-pin D-sub)
9-pin D-sub
RS-232 to TP-210A
G
G PIN 5 Connected to
Tx Connected to PIN 2
Tx
G
1
2
3
4
5
6
7
8
9
TP-210A to Controlled Unit