Instruction Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
2.1 Quick Start
The quick start chart summarizes the basic setup and operation steps of the
TP-210A.
Step 4: Connect the power
Step 2: Connect the inputs and outputs - see section 6
Set the Hs and Vs
polarity switches
Set the Hs and Vs
polarity switches
Step 3: Set the underside switches - see section 6
Mount the machine in a rack or
stick the 4 rubber feet to the
underside
Mount the machine in a rack or
stick the 4 rubber feet to the
underside
Step 1: Mount the machine - see section 5
2
3
4
1
OUT 10
UXGA OUT 2
OUT 9
OUT 8
OUT 7
OUT 6
OUT 5
OUT 4
OUT 3
OUT 2
OUT 1
UXGA OUT 1
UXGA INPUT
LINE OUTPUTS
I
NPUT
O1
UT
O2
UT
AA
NALOG UDIO
S/PDIF
A
NALOG
I
NPUT
O1
UT
O2
UT
S/PDIF
RS-232
I
N
O1
UT
O
UT
2
G R
X
GT
X
GT
X
TP-210A
Computer Graphics /
Audio / RS-232
Control
Range up
to 300ft
(up to
100 meters)
STP Cable
Display
Plasma
Display
To TP-124
To TP-124
To AV
Receiver
2
2
3
1
1
1
4
4
1
Connect a computer graphics source to
the UXGA input, an audio source to the
audio input and RS-232 to the Rx, G port
Connect the UXGA 1 video and audio
outputs, and the RS-232 port (if required)
Connect the UXGA 2 video and audio
outputs, and the RS-232 port (if required)
Connect to up to 10 TP-124 receivers via
CAT 5
Connect a computer graphics source to
the UXGA input, an audio source to the
audio input and RS-232 to the Rx, G port
Connect the UXGA 1 video and audio
outputs, and the RS-232 port (if required)
Connect the UXGA 2 video and audio
outputs, and the RS-232 port (if required)
Connect to up to 10 TP-124 receivers via
CAT 5
2
3
1
4
Audio
CAT 5
CAT 5
Audio
VGA
VGA
VGA
RS-232
RS-232