Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 4 4.1 4.2 5 5.1 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The TP-219HD is a high-performance twisted pair transmitter for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to 1080p. It takes one of two inputs as selected by the user and converts it to a twisted pair signal. The TP-220HD is a high-performance twisted pair receiver for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to 1080p.
Overview of the connectors on both ends of the cable. For units which are connected via terminal block connectors, the shield of the STP cable must be connected to a ground terminal on the units at both ends (use the ground terminal of the power supply connection if necessary). For a CAT 5 cable exceeding a distance of 50m, separate power supplies should be connected to the transmitter and to the receiver simultaneously. 3.
Your XGA/HD Line Transmitter/Switcher and Receiver/DA 4 Your XGA/HD Line Transmitter/Switcher and Receiver/DA This section describes the: • TP-219HD XGA/HD – Line Transmitter/Switcher, see section 4.1 • TP-220HD XGA/HD – Line Receiver/DA, see section 4.2 4.
Your XGA/HD Line Transmitter/Switcher and Receiver/DA Figure 2 and Table 2 define the TP-219HD underside panel: Figure 2: TP-219HD (Underside Panel) Table 2: TP-219HD (Underside Panel) Features 1 # Feature HS Switch 2 VS Switch Function Slide the switch up (to NORMAL) to retain the polarity 1 Slide the switch down to change the HS polarity to NEGATIVE polarity2 Slide the switch up (to NORMAL) to retain the polarity Slide the switch down 1 to change the VS polarity to NEGATIVE polarity 2 1 By default
Your XGA/HD Line Transmitter/Switcher and Receiver/DA 4.2 Your TP-220HD Figure 3 and Table 3 define the TP-220HD: 4 3 5 1 1 2 6 2 7 3 5 6 4 7 Figure 3: TP-220HD XGA/HD Line Receiver/DA Table 3: TP-220HD XGA/HD Line Receiver/DA Features # 1 2 3 4 5 6 7 Feature LINE IN RJ-45 Connector OUTPUT 1 15-pin HD Connector OUTPUT 2 15-pin HD Connector 12V DC EQ.
Connecting the TP-219HD and TP-220HD Figure 4 and Table 4 define the TP-220HD underside panel: Figure 4: TP-220HD (Underside Panel) Table 4: TP-220HD (Underside Panel) Features # 5 1 Feature HS Switch 2 VS Switch Function Slide the switch up 1 (to INVERTED) to invert the HS polarity Slide the switch down (to NORMAL) to retain the polarity Slide the switch up1 (to INVERTED) to invert the VS polarity Slide the switch down (to NORMAL) to retain the polarity Connecting the TP-219HD and TP-220HD You can
Connecting the TP-219HD and TP-220HD 3. On the TP-220HD, connect1 the: OUTPUT 1 15-pin HD connector to an XGA 2 acceptor (for example, Display 1) OUTPUT 2 15-pin HD connector to an XGA2 acceptor (for example, Display 2) 4. If necessary, set the HS and VS switches on the TP-220HD underside3. 5. Connect the LINE OUT RJ-45 connector on the TP-219HD to the LINE IN RJ-45 connector on the TP-220HD, via CAT 5 cabling, see section 5.2. 6.
Connecting the TP-219HD and TP-220HD LIN D H / A G X e in L / r e iv e c e R A D D H 0 2 -2 P T TP-220HD EI N OU TP UT 1 OU TP UT 2 VGA Display 2 VGA r e h c it w S / r te it m s n a r T D H 9 1 -2 P T Long CAT 5 cable Display 1 e in L TP-219HD D H / A G X LIN EO UT INP UT 1 INP UT 2 VGA VGA Computer Graphics Source 1 Computer Graphics Source 2 Figure 5: Connecting the TP-219HD/TP-220HD XGA System 10 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-219HD and TP-220HD 5.1 Connecting an HD System When connecting a high definition source, as illustrated in Figure 6, use a breakout cable such as the Kramer C-GM/3RVF. If you have a VGA to a 5BNC cable, use the RGB wires only.
Technical Specifications 6 Technical Specifications Table 6 includes the technical specifications 1. Table 6: Technical Specifications of the TP-219HD and TP-220HD Setup TP-219HD INPUTS: TP-220HD 2 XGA/HD on 15-pin HD connectors 1 CAT 5 IN on an RJ-45 connector OUTPUTS: 1 CAT 5 OUT on an RJ-45 connector 2 XGA/HD on 15-pin HD connectors MAX. OUTPUT LEVEL: RESOLUTION: 1.5Vpp Up to UXGA, up to 1080p DIFF. GAIN: 2.3% DIFF. PHASE: 0.2° K-FACTOR: 0.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000208 Rev: 2 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
