User guide

Your XGA/HD Line Transmitter/Switcher and Receiver/DA
7
4.2 Your TP-220HD
Figure 3
and Table 3 define the TP-220HD:
Figure 3: TP-220HD XGA/HD Line Receiver/DA
Table 3: TP-220HD XGA/HD Line Receiver/DA Features
# Feature Function
1 LINE IN RJ-45 Connector Connect
1
to the LINE OUT RJ-45 connector on the TP-219HD
2 OUTPUT 1 15-pin HD Connector Connect to the first XGA/HD acceptor
3 OUTPUT 2 15-pin HD Connector Connect to the second XGA/HD acceptor
4
12V DC
+12V DC connector for powering the unit
5 EQ. Trimmer Adjust
2
the cable compensation equalization level
6 LEVEL Trimmer Adjust
2
the output signal level
7 ON LED Illuminates when receiving power
1 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 5 and Figure 7)
2 Insert a screwdriver into the small hole and carefully rotate it, to trim the appropriate level
1
1
6
6
7
7
2
2
4
4
3
3
5
5