Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 4 4.1 5 5.1 5.2 5.3 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps of the TP-305A.
Overview 3 Overview The TP-305A UXGA - Audio - RS-232 Line Receiver/DA receives a CAT 5 signal from a transmitter 1 and distributes it to up to five other receivers (via CAT 5 cables). The TP-305A also decodes the CAT 5 signal and distributes it to a UXGA output, an analog audio output, a digital audio output and an RS-232 output. The TP-305A serves as a power center that can distribute power to both the transmitter and the connected receivers (see section 3.1).
Overview 3.1 About the Power Connect Feature The Power Connect feature applies as long as the cable can carry power. This feature is available when using STP cable and the distance does not exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge cable should be used 1. For units which are connected via RJ-45 connectors, make sure that the shield of the STP cable is connected to the metal casing of the connectors on both ends of the cable.
Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA 4 Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA Figure 1 and Table 1 define the TP-305A: Figure 1: TP-305A UXGA - Audio - RS-232 Line Receiver/DA Table 1: TP-305A UXGA - Audio - RS-232 Line Receiver/DA Features 1 2 3 # Feature POWER Switch LINK LED EQ. 1 Trimmer 4 5 6 7 LEVEL Trimmer LINE IN RJ-45 Connector UXGA OUT 15-pin HD Connector LINE OUTPUT RJ-45 Connectors 8 AUDIO OUT 10 ANALOG 3.
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 4.
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA RJ-45 connector on the TP-305A, via STP cabling (with a range of up to 300ft (up to100m)), see section 3.2 2. On the TP-123, connect: A UXGA source (for example, the graphics card of a laptop) to the XGA IN 15-pin HD computer graphics video connector and an audio source to the Audio IN 3.
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA TP-305A LIN E IN UX GA OU T 1 2 LIN EO UT P 3 UTS 4 5 AU DIO OU ALO T G AN TP-123 TP -1 23 TP-124 OU T 12 VD C VG A RS Plasma Display -23 RS -23 2 Audio VGA DIO S/P DIF OU T 12 VD C VG A S/P DIF Audio GND TXD AU RS-232 VGA / LOG LOG DIO ANA RS -232 ANA AU Au dio E IN E IN RS -232 / Re ce ive r LIN LIN RS-232 GND RXD TP -1 24 D at aL ine XG AO UT GND TXD XG AO UT TP-124 XG A 12 VD C D at aL ine STP
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 3. Connect the LINE OUTPUT 2 RJ-45 connector of the first TP-305A to the LINE IN RJ-45 connector of the third TP-305A. 4. Connect the LINE OUTPUT 3 RJ-45 connector of the first TP-305A to the LINE IN RJ-45 connector of the fourth TP-305A. 5. Connect the LINE OUTPUT RJ-45 connectors of each TP-305A unit, to the LINE IN RJ-45 connectors of the appropriate receivers, as illustrated in Figure 4. 6.
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA 5.
Technical Specifications 6 Technical Specifications Table 5 includes the technical specifications 1 of the TP-305A: Table 5: Technical Specifications of the TP-305A INPUT: OUTPUTS: MAX. OUTPUT LEVEL: POWER OUTPUTS: RESOLUTION: BANDWIDTH: SAMPLING RATE FOR S/PDIF: S/N RATIO: TOTAL GAIN: TND+N: POWER SOURCE: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS: 1 LINE IN on an RJ-45 connector 5 LINE OUT on RJ-45 connectors 1 UXGA video output on a 15-pin HD connector 1 audio output on a 3.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution P/N: 2900- 000365 Rev: 3 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
