Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 4 4.1 5 6 6.1 6.2 6.3 6.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The TP-310A UXGA Line Receiver/DA receives a CAT 5 signal from a transmitter 1 and distributes it to up to 10 other receivers (via CAT 5 cables). The TP-310A also decodes the CAT 5 signal and simultaneously distributes it to two UXGA outputs, two analog audio outputs, two digital audio outputs and two RS-232 outputs. The TP-310A serves as a power center that can distribute power to both the transmitter and the connected receivers (see section 3.1).
Your TP-310A UXGA Line Receiver/DA 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where skewing is not an issue. For cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used.
Your TP-310A UXGA Line Receiver/DA Figure 1: TP-310A UXGA Line Receiver/DA 5
Your TP-310A UXGA Line Receiver/DA Table 1: TP-310A UXGA Line Receiver/DA Features 1 2 3 # Feature POWER Switch LINK LED 1 EQ. Trimmer 4 5 6 7 8 LEVEL Trimmer LINE IN RJ-45 Connector UXGA OUT 2 HD15F Connector UXGA OUT 1 HD15F Connector LINE OUTPUT RJ-45 Connectors 9 10 11 12 13 Audio OUT ANALOG 1 3.5mm Mini Jacks ANALOG 2 Audio OUT RCA S/PDIF 1 Connectors S/PDIF 2 RS-232 Terminal G, Tx1 Block Connector G, Tx2 14 Power Connector with Fuse 4.
Installing in a Rack 5 Installing in a Rack This section provides instructions for rack mounting the 1U unit.
Configuring the TP-310A UXGA Line Receiver/DA 6 Configuring the TP-310A UXGA Line Receiver/DA This section describes how to: • Connect the TP-310A (see section 6.1) • Connect additional TP-310A units (see section 6.2) • Wire the CAT 5 LINE IN/LINE OUT RJ-45 Connectors (see section 6.3) • Wire the RS-232 connector (see section 6.4) 6.1 Connecting a single TP-310A UXGA Line Receiver/DA You can use the TP-310A with a UXGA/audio/data line transmitter such as the Kramer TP-123 1.
Configuring the TP-310A UXGA Line Receiver/DA 3. Connect the LINE OUTPUT CAT 5 connectors as follows 1: The LINE OUT 1 RJ-45 connector on the TP-310A to the LINE IN RJ-45 connector on the TP-124 2 via STP cabling 3 (with a range of up to 300ft (up to 100m)) 4 The LINE OUT 10 RJ-45 connector on the TP-310A to the LINE IN RJ-45 connector on the TP-1242, via STP cabling3 (with a range of up to 300ft (up to 100m)) 4.
Configuring the TP-310A UXGA Line Receiver/DA Figure 3: Connecting the TP-310A UXGA/Line Receiver – DA system 10 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the TP-310A UXGA Line Receiver/DA 6.2 Connecting Additional TP-310A UXGA Line Receiver/DA Units You can connect several TP-310A units via the LINE OUTPUT RJ-45 connectors on the first unit. The number of TP-310A units that can be connected depends upon the quality of the input signal that you require and the distance between the machines. We do not recommend cascading more than five TP-310A units.
Configuring the TP-310A UXGA Line Receiver/DA Transmitter TP-46 TP-46 TP-122 ... TP-124 TP-122 ... TP-122 TP-124 ...
Configuring the TP-310A UXGA Line Receiver/DA 6.
Technical Specifications 7 Technical Specifications Table 5 includes the technical specifications of the TP-310A: 1 Table 5: Technical Specifications of the TP-310A UXGA Line Receiver/DA INPUT: OUTPUTS: MAX. OUTPUT LEVEL: POWER OUTPUTS: RESOLUTION: BANDWIDTH (-3dB): SAMPLING RATE FOR S/PDIF: S/N RATIO: TOTAL GAIN: TND+N: POWER SOURCE: DIMENSIONS: WEIGHT: ACCESSORIES: 1 RJ-45 TP LINE IN connector 10 RJ-45 TP LINE OUT connectors 2 UXGA Video out connectors 2 3.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
