User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Component – S/PDIF Line Transmitter and Line Receiver
8
Table 3: TP-42 Component – S/PDIF Line Receiver Topside Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 LINE IN RJ-45 Connector
Connects to the LINE OUT connector on the TP-41
1
3 S/PDIF RCA Connector Connects to the digital audio acceptor
4 V RCA Connector
5 U RCA Connector
6
OUTPUTS
Y RCA Connector
Connects to the component video acceptor
7 ON LED Illuminates when receiving power
4.2.2 Your TP-42 Component – S/PDIF Line Receiver Underside
Figure 8 and Table 4 define the underside of the TP-42:
Figure 8: TP-42 Component – S/PDIF Line Receiver Underside
Table 4: TP-42 Component – S/PDIF Line Receiver Underside Features
# Feature Function
1 Y EQ. Trimmer Adjusts
2
the cable compensation equalization level for output Y
2 Y LEVEL Trimmer Adjusts
2
the Y output signal level
3 U EQ. Trimmer Adjusts
2
the cable compensation equalization level for output U
4 U LEVEL Trimmer Adjusts
2
the U output signal level
5 V EQ. Trimmer Adjusts
2
the cable compensation equalization level for output V
6 V LEVEL Trimmer Adjusts
2
the V output signal level
7 AUDIO EQ. Trimmer Adjusts
2
the audio equalization level
8 AUDIO LEVEL Trimmer Adjusts
2
the volume
1 Using a straight pin to pin UTP cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 5 and Figure 10)
2 Insert a screwdriver into the small hole and carefully rotate it, trimming the level