User Manual

14 TP-410 - Connecting the TP-410

Use your PC initially to configure the Ethernet settings using K-UPLOAD software.

When configuration is complete, set the DIP-switches to their previous position and

then turn the power Off and On again.

The latest version of K-UPLOAD and installation instructions can be

downloaded from the Kramer Web site at

www.kramerelectronics.com

5.5 Connecting Several TP-410 Units

You can daisy chain up to 15 TP-410 machines, as illustrated in Figure 7.

Figure 7: Connecting Multiple TP-410 Units