User Manual

TP-410 - Technical Specifications 25
25
11 Technical Specifications
INPUTS: 1 UXGA on a 15-pin HD connector
1 unbalanced stereo audio on a 3.5mm mini jack
1 S/PDIF on an RCA connector
1 TP on an RJ-45 connector
OUTPUTS: 10 TP on RJ-45 connectors
1 UXGA on 15-pin HD connectors
1 unbalanced stereo audio 3.5mm mini jacks
1 S/PDIF on RCA connectors
CONTROL PORTS: RS-232 3 pin terminal block (data and control)
RS-485 3 pin terminal block (data and control)
RJ-45 Ethernet (data and control)
RESOLUTION: Up to WUXGA (1920 x 1200) and 2k
MAX. OUTPUT
LEVEL:
VIDEO: 1.6Vpp AUDIO: 2.3Vpp
CONTROLS: RS-232/RS-485/Ethernet program control
Source control from front panel
TP-IN level and equalization from rear panel
SERIAL BAUD RATE: Up to 19200 bps
SERIAL MODE: Full-duplex
BANDWIDTH: AUDIO: 20Hz to 20kHz @0.5dB
S/N RATIO: AUDIO: <-80dB
TOTAL GAIN: Audio: 0dB
COUPLING: Audio: AC
AUDIO THD + NOISE: Audio: <0.03%
OPERATING
TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE
TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY: 10% to 90%, RHL non-condensing
POWER SOURCE: 100-240V AC, 16VA
DIMENSIONS: 48.26cm x 19.1cm x 1U (19" x 7.52" x 1U) W, D, H
WEIGHT: 3.8kg (8.4lbs) approx
ACCESSORIES: Power cord, Windows
®
-based control software, rack “ears”
Specifications are subject to change without notice
Go to our Web site at
http://www.kramerelectronics.com to access the list of resolutions