Instruction Manual

Connecting the TP-43 Component – S/PDIF Transceiver
5
4.2 Your TP-43 Component – S/PDIF Transceiver Underside
Figure 4 and Table 2 define the underside of the TP-43:
Figure 4: TP-43 Component – S/PDIF Transceiver Underside
Table 2: TP-43 Component – S/PDIF Transceiver Underside Features
# Feature Function
1 Y Trimmer Adjusts
1
the Y output signal level
2 U Trimmer Adjusts
1
the U output signal level
3
LEVEL
V Trimmer Adjusts
1
the V output signal level
4 Y Trimmer Adjusts
1
the cable compensation equalization level for output Y
5 U Trimmer Adjusts
1
the cable compensation equalization level for output U
6
COMPONENT
EQ.
V Trimmer Adjusts
1
the cable compensation equalization level for output V
7 LEVEL Adjusts
1
the digital audio signal level
8
LOCAL OUTPUT
S/PDIF
EQ. Adjusts
1
the digital audio output cable compensation equalization level
9 V Trimmer Adjusts
1
the V line output signal level
10 U Trimmer Adjusts
1
the U line output signal level
11 Y Trimmer Adjusts
1
the Y line output signal level
12
LINE
OUTPUT
LEVELS
S/PDIF Trimmer Adjusts
1
the S/PDIF digital audio line output signal level
5 Connecting the TP-43 Component – S/PDIF Transceiver
This section describes how to connect:
 The TP-43, see section 4.1
 An extended Component – S/PDIF distribution system by
connecting three TP-43 units between the TP-41 and the TP-42,
see section 4.2
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level