Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 4 5 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The TP-50 is a twisted pair receiver for computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The unit converts the twisted pair signal back into two computer graphics video, stereo audio and S/PDIF audio signals simultaneously. Additional TP-50 units can be connected via the TP-50 LINE LOOP twisted pair connector, to connect additional outputs as well as to extend the range of the output signals 1.
Overview electromagnetic standards, Kramer does not commit to meeting the standard with UTP cable. 3.2 About the Power Connect Feature The Power Connect feature applies as long as the cable can carry power. This feature is available when using STP cable and the distance does not exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge cable should be used 1.
Your TP-50 XGA/Audio Line Receiver – DA 4 Your TP-50 XGA/Audio Line Receiver – DA Figure 1 and Table 1 define the TP-50: Figure 1: TP-50 XGA/Audio Line Receiver – DA Table 1: TP-50 XGA/Audio Line Receiver – DA Features # 1 2 3 4 5 6 7 8 9 Feature 12V DC LINE LOOP RJ-45 Connector Function +12V DC connector for powering the unit Connect to the LINE IN RJ-45 connector of an additional receiver to increase the number of outputs LINE IN RJ-45 Connector Connect to the LINE OUT connector of a transmitter 1 XG
Your TP-50 XGA/Audio Line Receiver – DA Figure 2 and Table 2 define the underside of the TP-50: Figure 2: TP-50 XGA/Audio Line Receiver – DA Underside Table 2: TP-50 XGA/Audio Line Receiver – DA Underside Features 1 2 3 # Feature LEVEL Trimmer EQ.
Connecting the TP-50 XGA/Audio Line Receiver – DA 5 Connecting the TP-50 XGA/Audio Line Receiver – DA You can use the TP-50 with an XGA/audio transmitter, such as the Kramer TP-121 or TP-45 transmitter 1, and also connect an additional TP-50 unit to increase the number of outputs. To configure a TP-45/TP-50 XGA/Audio Line Receiver – DA system 2 as illustrated in the example in Figure 3, do the following: 1.
Connecting the TP-50 XGA/Audio Line Receiver – DA 5. If required, connect the LINE LOOP RJ-45 connector on the TP-50 to an additional TP-50 unit1. 6.
Connecting the TP-50 XGA/Audio Line Receiver – DA 5.
Technical Specifications 6 Technical Specifications Table 4 defines the technical specifications: Table 4: Technical Specifications 1 of the TP-50 INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: VIDEO RESOLUTION: AUDIO BANDWIDTH: DIFF. GAIN: DIFF.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
