User manual

Using the TP-575 HDMI Line Receiver / DA
7
5.1 Connecting the TP-575 HDMI Line Receiver / DA
To connect the TP-575 together with the PT-571 HDMI Line Transmitter
and the PT-572+ HDMI Line Receiver, as illustrated in the example in
Figure 2, do the following:
1. On the PT-571, connect an HDMI source (for example, a DVD player)
to the HDMI IN connector.
2. Connect the CAT 5 OUT RJ-45 connector on the PT-571 to the CAT 5
LINE IN RJ-45 connector on the TP-575 via a twisted pair cable
1
5.2
(see
section ).
3. On the TP-575, connect the OUT 2 (HDMI) connector to an HDMI
acceptor (for example, a plasma display).
4. Connect the OUT 1 (LINE) CAT 5 RJ-45 connector on the TP-575 to
the CAT 5 IN RJ-45 connector on the PT-572+ via a twisted pair cable
1
(see section
5.2).
5. On the PT-572+, connect the HDMI OUT connector to an HDMI
acceptor (for example, a plasma display).
6. Connect the 12V DC power adapter to the power socket
2
Figure 2
on the TP-575
and connect the adapter to the mains electricity (not shown in ).
7. Press the EDID SETUP button to acquire or change the EDID
information (see section
5.3).
1 Using the Kramer CAT 5 BC-DGKat524, CAT 6 BC-DGKat623 cable or BC-DGKat7a23
2 To power the TP-575 as well as the PT-571 and PT-572+