User manual

8
TP-578H - Connecting the TP-578H
5 Connecting the TP-578H
Always disconnect/switch off the power to all devices before
connecting them to your TP-578H. After connecting your TP-578H,
connect its power and then reconnect/switch on the power to the other
devices.
Figure 3: Connecting the TP-578H DGKat to HDMI Receiver
To connect the TP-578H as illustrated in the example in Figure 3:
1. Connect the DGKat Out RJ-45 connector on the WP-577VH to the DGKat In
RJ-45 connector on the TP-578H using STP cable (see Section 3.1).
2. Connect the HDMI Output on the TP-578H to the HDMI acceptor, (for
example, a projector).
3. Connect the RS-232 3-way terminal block on the TP-578H to the RS-232
controlled device, (for example, a projector).
i