User manual

TP-578H - Protocol 3000

Command - GEDID

Command Type - System

Command Name

Permission

Transparency

Set:

GEDID

Administrator

Public

Get:

GEDID?

End User

Public

Description

Syntax

Set:

Set EDID data from device

#GEDID␠stage, stage_id ␍

Get:

Get EDID support on certain input/output

#GEDID?␠stage, stage_id ␍

Response

Set:

Multi-line response:

~nn@GEDID␠stage,stage_id,size␍␊

EDID_data␍␊

~nn@GEDID␠stage,stage_id␠OK␍␊

Get:

~nn@GEDID␠stage,stage_id,size␍␊

Parameters

stage - input/output

stage_id - number of chosen stage (1.. max number of inputs/outputs)

size - EDID data size. For Set, size of data to be sent from device, for Get, 0 means no EDID support

Response Triggers

Response is sent to the com port from which the Set (before execution) / Get command was received

Notes

For Get, size=0 means EDID is not supported

For old devices that do not support this command, ~nn@ ERR 002␍␊ is received