Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 3.4 4 4.1 4.2 4.3 5 5.1 5.2 5.3 5.4 5.5 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The TP-582T and TP-582R are a high-quality twisted pair transmitter and receiver for HDMI, 100BaseT Ethernet, bidirectional RS-232 and IR signals. With the TP-582T you can select one of two HDMI inputs, and convert it with the 100BaseT Ethernet, RS-232 and IR input signals to a twisted pair signal. The TP-582R converts the twisted pair signal back to 100BaseT Ethernet, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK® audio outputs.
Overview • • LED status indicators for input, output, link and power Two RJ-45 CAT 5 output connectors: one for the line output and the other for the Ethernet input The compact MegaTOOLS® enclosures (for the transmitters and the receiver) let you rack mount up to two units side-by-side in a 1U 19” rack space when using the optional RK-T2B rack.
Overview 3.2 About HDMI High-Definition Multimedia Interface (HDMI) is an uncompressed all-digital 1 audio/video interface, widely supported in the entertainment and home cinema industry. It delivers the highest high-definition image and sound quality.
Overview 3.3 About HDBaseT™ Technology HDBaseT™ is an advanced and inexpensive all-in-one connectivity technology 1. It is particularly suitable in the consumer home environment as a digital home networking alternative where it enables you to replace numerous cables and connectors by a single LAN cable used to transmit uncompressed full high-definition video, audio, 100BaseT Ethernet, power over cable, as well as various control signals. 3.
Your HDMI Line Transmitters/Receiver 4 Your HDMI Line Transmitters/Receiver This section describes the: • TP-581T HDMI Line Transmitter, see Section 4.1 • TP-582T HDMI Switcher/Line Transmitter, see Section 4.2 • TP-582R HDMI Line Receiver DA, see Section 4.3 4.
Your HDMI Line Transmitters/Receiver 4.2 Your TP-582T HDMI Switcher/Line Transmitter Figure 2 and Table 2 define the TP-582T: Figure 2: TP-582T HDMI Switcher/Line Transmitter Table 2: TP-582T HDMI Switcher/Line Transmitter Features # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Feature LINE OUT RJ-45 Connector HDMI IN 1 Connector HDMI IN 2 Connector IR 3.
Your HDMI Line Transmitters/Receiver 4.3 Your TP-582R HDMI Line Receiver DA Figure 3 and Table 3 define the TP-582R: Figure 3: TP-582R HDMI Line Receiver DA Table 3: TP-582R HDMI Switcher/Line Receiver Features 1 # Feature LINE IN RJ-45 Connector 2 3 4 5 6 7 8 9 10 11 12 13 14 HDMI OUT 1 Connector HDMI OUT 2 Connector S/PDIF Connector TOSLINK® Connector ETHERNET Connector RS-232 9-pin D-sub Connector 5V DC IR 3.
Connecting the TP-581T, TP-582T and TP-582R 5 Connecting the TP-581T, TP-582T and TP-582R You can use the TP-581T HDMI Line Transmitter or the TP-582T HDMI Switcher/Line Transmitter with the TP-582R HDMI Line Receiver DA to configure an HDMI transmitter/receiver system. • To connect the TP-582T or TP-581T, see Section 5.1 • To connect the TP-582R, see section Section 5.2 • To remotely control the A/V equipment, see Section 5.3 5.
Connecting the TP-581T, TP-582T and TP-582R 5.2 Connecting the TP-582R To connect the TP-582R as shown in the example in Figure 4, do the following: 1. Connect the HDMI OUT 1 connector to the first HDMI acceptor (for example, LCD display 1). 2. Connect the HDMI OUT 2 connector to the first HDMI acceptor (for example, LCD display 2). 3. Connect the ETHERNET RJ-45 connector to a network. 4. Connect the RS-232 9-pin D-sub connector to an RS-232 port (for example, a projector). 5. Connect the IR 3.
Connecting the TP-581T, TP-582T and TP-582R Figure 4: Connecting the TP-582T/TP-582R Transmitter/Receiver 12 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-581T, TP-582T and TP-582R 5.3 Controlling the A/V Equipment via an IR Transmitter Since the IR signal on the TP-581T/TP-582T and the TP-582R is bidirectional, you can use a remote control transmitter 1 to send commands (to the A/V equipment) from either end of the transmitter /Receiver system. To do so you have to use the Kramer external IR sensor 2 and the Kramer IR emitter cable 3. Note that the IR sensor is only used to select the TP-582T inputs.
Connecting the TP-581T, TP-582T and TP-582R Figure 6 illustrates how to control the LCD display via the TP-581T/TP-582T.
Connecting the TP-581T, TP-582T and TP-582R 5.4 Controlling the TP-582T via the REMOTE Terminal Block Connector The contact closure remote control pins operate in a similar way to the INPUT SELECT button. Using the contact closure remote control you can select the HDMI input. To do so, momentarily connect the required input pin (IN 1 or IN2) on the REMOTE CONTROL terminal block connector to the GND (Ground) pin, as Figure 7 illustrates. Do not connect more than one PIN to the GND PIN at the same time.
Connecting the TP-581T, TP-582T and TP-582R 5.
Technical Specifications 6 Technical Specifications Table 5 includes the technical specifications 1. Table 5: Technical Specifications of the TP-581T, TP-582T and TP-582R TP-581T TP-582T INPUTS: 1 HDMI connector 2 HDMI connectors 1 remote contact closure on a terminal block connector OUTPUTS: 1 RJ-45 connector 1 RJ-45 connector TP-582R 1 RJ-45 connector PORTS: 2 HDMI connectors 1 TOSLINK® optical audio 1 S/PDIF in an RCA connector 1 IR on a 3.5mm mini jack 1 IR on a 3.5mm mini jack 1 IR on a 3.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
