User manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your HDMI Line Transmitters/Receiver
8
4.2 Your TP-582T HDMI Switcher/Line Transmitter
Figure 2 and Table 2 define the TP-582T:
Figure 2: TP-582T HDMI Switcher/Line Transmitter
Table 2: TP-582T HDMI Switcher/Line Transmitter Features
#
Feature
Function
1 LINE OUT RJ-45 Connector
Connects to the CAT 5 IN RJ-45 connector on the TP-582R
2 HDMI IN 1 Connector Connects to the HDMI source 1
3 HDMI IN 2 Connector Connects to the HDMI source 2
4 IR 3.5mm Mini Jack Connector Connects to an external infrared transmitter/sensor (receiver)
5 ETHERNET Connector Connects to a network
6 REMOTE CONTROL Terminal Block Connects to contact closure switches (see Section 5.4)
7 RS-232 9-pin D-sub Connector Connects to an RS-232 port
8 5V DC +5V DC connector for powering the unit
9 REMOTE IR Sensor Senses commands from the Kramer IR remote control device
1
10 IR LED Lights when an infrared signal is detected
11 INPUT SELECT Switch Press to toggle between HDMI inputs
12 IN 1 LED Lights when the HDMI 1 input device is connected
13 IN 2 LED Lights when the HDMI 2 input device is connected
14 OUT LED Lights when an HDMI output device is detected
15 LINK LED Lights when the TP connection is active
16 ON LED Lights when receiving power
1 Note that the IR sensor is only used to select the TP-582T inputs. These IR signals cannot be transmitted to the TP-582R