user manual

VS-81H - Operating the VS-81H 15
Figure 5: Internet Protocol (TCP/IP) Properties Window
6.4.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VS-81H to the Ethernet port on a network
hub or network router, via a straight through cable with RJ-45 connectors.
6.4.3 Configuring Several Units via the Ethernet Port
To control several units via the Ethernet, connect each unit via the Ethernet port to
the LAN port of your PC. Use your PC to initially configure the settings of each unit
(see Section
6.4 6.4.1).