user manual

10 WP-121 - Installing and Connecting the WP-121
5.2 Wiring the 9-Pin Terminal Block Line Output Connector
The 9-pin terminal block is a plug-in connector for attaching the STP cable. Follow
the colors of the color-coded sticker on these terminals for proper connection of
the cable.
Figure 7 defines the pinouts for the terminal block.
Figure 7: Terminal Block Pinouts
Notes:
• Use the connector clips only when removing wires, not when inserting them
• Each wire should protrude 9mm (0.35") from the plastic insulation so that it
can be easily connected. To prevent the wires crossing, be sure that each
wire is fully inserted