Kramer Electronics, Ltd.
Contents Contents 1 2 3 3.1 4 5 5.1 Introduction Getting Started Overview Recommendations for Best Performance Your Kramer RK-1UTB/T Under the Table Enclosure Install the Kramer RK-1UTB/T Under the Table Enclosure Mount the Kramer devices on the RK-1UTB/T 1 1 2 3 4 5 5 5.1.1 5.1.2 Installing a Kramer TOOL Mounting a Kramer Machine 5 7 5.2 5.3 5.4 5.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Overview 3 Overview The RK-1UTB/T is an under the table enclosure that is easily installed underneath a wooden table or podium top. The unit is sturdy, cost-effective, and easy to install. The RK-1UTB/T: • Lets you install one half-19" 1U unit or a combination of 1/4-19" 1U units and 1/8-19" 1U units.
Overview Table 1: Using the RK-1UTB/T 1 Mounting Kramer products on the RK-1UTB For example: • One VP-100A unit • Two 104B units • One 104B unit • One PS-1DVI unit • One PT-1PS unit • Four PS-1DVI units The RK-1UTB/T does not have to be entirely full with mounted units. You can use the optional blank panels defined in Table 2 to fill the empty spaces.
Your Kramer RK-1UTB/T Under the Table Enclosure 4 Your Kramer RK-1UTB/T Under the Table Enclosure Figure 2 and Table 3 define the RK-1UTB/T: Rear View Front View Figure 2: RK-1UTB/T Under the Table Enclosure Table 3: RK-1UTB/T Under the Table Enclosure Features 1 # Feature Rim Screw Holes Function For fixing the RK-1UTB/T under the table (3 on each side) 2 Side Panel Includes screw holes for fixing the 1/2U or 1/4U unit using the appropriate screw holes 3 Mounting Area Space for mounting a Krame
Install the Kramer RK-1UTB/T Under the Table Enclosure 5 Install the Kramer RK-1UTB/T Under the Table Enclosure To install the RK-1UTB/T you have to: • Mount the Kramer devices on the RK-1UTB/T (see section 5.1) • Attach the RK-1UTB/T under the table (see section 5.2) • Install the cables (see section 5.3) This section also describes how to: • Mount units that do not have underside screw holes (see section 5.4) • Connect a blank panel (see section 5.5) 5.
Install the Kramer RK-1UTB/T Under the Table Enclosure 3. Slide the TOOL with the attached bracket so that the TOOL front panel faces the TOOL opening on the RK-1UTB/T and the “L” shaped bracket hole faces the TOOL bracket screw hole on the RK-1UTB/T front panel (see Figure 4). Figure 4: Sliding the TOOL 4. Fasten the fixed bracket to the left side of the TOOL 1 and fasten the attached “L” shaped bracket to the front panel of the RK-1UTB/T 2 (see Figure 5).
Install the Kramer RK-1UTB/T Under the Table Enclosure 5.1.2 Mounting a Kramer Machine The RK-1UTB/T underside mounting area includes a set of screw holes that are suitable for any combination of units to be mounted. To mount a unit on the RK-1UTB/T (for example, the Kramer TP-953 MultiTOOL 1), as illustrated in Figure 2, do the following: 1. Place the TP-953 on the rack. 2. Hold both the TP-953 and the RK-1UTB/T with your hands and turn them upside down. 3.
Install the Kramer RK-1UTB/T Under the Table Enclosure 5.2 Securing the RK-1UTB/T Enclosure to the Table To install the RK-1UTB/T underneath the table, as illustrated in Figure 7, do the following: 1. Place the unit to the underside of the table and mark the correct location. 2. Insert the six 4x3/8” wood screws into the six rim screw holes (three on each side) and fix the RK-1UTB/T to the table. Figure 7: Securing the RK-1UTB/T Underneath of the Table 5.
Install the Kramer RK-1UTB/T Under the Table Enclosure 5.4 Mounting Units that do not have Underside Screw Holes Some Kramer machines do not have screw holes on the underside, which fit the holes on the RK-1UTB/T. These machines (for example, the VP-5xl 1) are connected via the screw holes on the sides of the RK-1UTB/T. To mount the VP-5xl on the RK-1UTB/T as illustrated in Figure 8, do the following: 1.
Technical Specifications 5.5 Connecting a Blank Panel to the RK-1UTB/T You can connect a blank panel 1 to the RK-1UTB/T to cover an empty space, as the example in Figure 9 illustrates: Underside View Blank Panel Part No:60-900014 Figure 9: RK-1UTB/T Rack Adapter – Connecting a Blank Panel 6 Technical Specifications Table 4 includes the technical specifications: 2 Table 4: Technical Specifications of the RK-1UTB/T DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS: 19-inch (W), 7-inch (D) 1U (H) 1.2kg (2.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
