Owner manual
KRAMER ELECTRONICS LTD.
8
Figure 3: VM-1021 Front/Rear Panel Features
Table 5: VM-1021 Front Panel Features
No.
Feature Function
1.
Power Switch Illuminated switch: Supplies power to the unit.
2.
EQ trimmer (SET 4 ADJUST) Controls cable equalization of SET 4 video outputs.
3.
LEVEL trimmer (SET 4 ADJUST) Controls level of SET 4 video outputs.
4.
EQ trimmer (SET 3 ADJUST) Controls cable equalization of SET 3 video outputs.
5.
LEVEL trimmer (SET 3 ADJUST) Controls level of SET 3 video outputs.
6.
EQ trimmer (SET 2 ADJUST) Controls cable equalization of the SET 2 video outputs.
7.
LEVEL trimmer (SET 2 ADJUST) Controls level of SET 2 video outputs.
8.
EQ trimmer (SET 1 ADJUST) Controls cable equalization of the SET 1 video outputs.
9.
LEVEL trimmer (SET 1 ADJUST) Controls level of the SET 1 video outputs.
10.
DC (COUPLING) switch Selects DC coupling when pushed.
11.
AC (COUPLING) switch Selects AC coupling when pushed.
12.
BLACK (CLAMP) switch Clamps video signal to the black level when pressed (best
used for Composite or Component video).
13.
TIP (CLAMP) switch Clamps video signal to the sync tip level when pressed
(best used for RGB signals).
Table 6: VM-1021 Rear Panel Features
No. Feature Function
1.
INPUT BNC connector Video input
2.
TERM pushbutton Selects “75“ or “HI-z” impedance when pressed (for
looping select "Hi-z").
3.
LOOP BNC connector Provides video looping capability to increase number of
outputs.
4.
OUT 1-5 BNC connectors (SET 1) SET 1 of 5 amplified buffered and clamped video outputs.
5.
OUT 1-5 BNC connectors (SET 2) SET 2 of 5 amplified buffered and clamped video outputs.
6.
OUT 1-5 BNC connectors (SET 3) SET 3 of 5 amplified buffered and clamped video outputs.
7.
OUT 1-5 BNC connectors (SET 4) SET 4 of 5 amplified buffered and clamped video outputs.
8.
Power Connector A 3-prong AC connector allows power to be supplied to the
unit. Directly underneath this connector, a fuse holder houses
the appropriate fuse.