Owner manual


KRAMER ELECTRONICS LTD.
11
Figure 6: VM-1055 Front/Rear Panel Features
Table 9: VM-1055 Front/Rear Panel Features
No. Feature Function
1. Power switch Illuminated switch: Supplies power to the unit.
2. 75 switch Selects “ 75“ or “ HI-z” impedance for Hs Channel. When at
the "75" position, the signal applied to the connector
should be analog video or sync signal. When in the “ HI-z”
position a TTL level sync signal may be used.
3. IN Hs BNC connector Hs Channel video input (horizontal sync).
4. OUT Hs 1- 5 BNC connectors Hs Channel amplified and buffered video outputs.
5. 75 switch Selects “ 75“ or “ HI-z” impedance for Vs Channel. When at
the "75" position, the signal applied to the connector
should be analog video or sync signal. When in the “ HI-z”
position a TTL level sync signal may be used.
6. IN Vs BNC connector Vs Channel video input(vertical sync).
7. OUT Vs 1- 5 BNC connectors Vs Channel amplified and buffered video outputs that are
identical to each other and to the input.
8. IN R BNC connector R Channel video input.
9. OUT R 1-5 impedance for Vs
Channel.
R Channel amplified and buffered video outputs that are
identical to each other and to the input.
10. IN G BNC connector G Channel video input.
11. OUT G 1-5 BNC connectors G Channel amplified and buffered video outputs that are
identical to each other and to the input.
12. IN B BNC connector B Channel video input.
13. OUT B 1-5 BNC connectors B Channel amplified and buffered video outputs that are
identical to each other and to the input.
14. Power Connector A 3-prong AC connector allows power to be supplied to the
unit. Directly underneath this connector, a fuse holder houses
the appropriate fuse.