Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 4 5 6 6.1 6.2 6.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The VM-1110xl is a high performance balanced audio DA (distribution amplifier) using XLR connectors. It can be configured as a mono (1:10 or 2x1:5) DA or as a stereo (1:5) DA.
Your VM-1110xl Balanced Audio Distributor Figure 1: VM-1110xl Balanced Audio Distributor 4 KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VM-1110xl Balanced Audio Distributor Table 1: VM-1110xl Balanced Audio Distributor Features 1 2 3 # Feature Power LED 1:10 / 2x1:5 Button Level B Trimmer Function Lights when the unit is powered on 1 2 Pushing in selects 2x1:5 , releasing selects 1:10 Adjusts3 the output signal level for OUTPUT B 4 5 6 7 8 9 10 Level A Trimmer INPUT A XLR Female Connector INPUT B XLR Female Connector OUT A XLR Male Connector OUT B XLR Male Connector Power Connector with Fuse ON/OFF Switch Adjusts the output signa
Installing the VM-1110xl in a Rack 5 Installing the VM-1110xl in a Rack This section describes how to install the VM-1110xl in a rack.
Connecting Your VM-1110xl 6.1 Connecting a 1:10 Mono DA To connect1 the VM-1110xl as a 1:10 mono DA, as the example in Figure 2 illustrates, do the following: 1. Connect one mono audio source (for example, a mono audio player) to INPUT A on the rear panel. 2. Connect up to 10 audio acceptors2 to the OUT connectors on the rear panel. 3. On the front panel, release the 1:10 / 2x1:5 button. 4. Connect the power cord to the electricity supply. 5. Switch on the VM-1110xl.
Connecting Your VM-1110xl 6.2 Connecting a 2x1:5 Mono DA To connect1 the VM-1110xl as a 2x1:5 mono DA, as the example in Figure 3 illustrates, do the following: 1. Connect mono audio source A (for example, a mono audio player) to INPUT A on the rear panel. 2. Connect mono audio source B (for example, a mono audio player) to INPUT B on the rear panel. 3. Connect up to 10 audio acceptors2 to the OUT connectors on the rear panel.
Connecting Your VM-1110xl 6.3 Connecting a 1:5 Stereo DA To connect1 the VM-1110xl as a 1:5 stereo DA, as the example in Figure 4 illustrates, do the following: 1. Connect one stereo audio source (for example, a stereo audio player) to INPUT A (left channel) and INPUT B (right channel) on the rear panel. 2. Connect up to 5 audio acceptors2 to the OUT connectors (left channels to OUT A and right channels to OUT B) on the rear panel. 3. On the front panel, press IN the 1:10 / 2x1:5 button. 4.
Technical Specifications 7 Technical Specifications The VM-1110xl technical specifications are shown in Table 2: 1 Table 2: VM-1110xl Balanced Audio Distributor Technical Specifications INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CROSSTALK: CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER SOURCE: DIMENSIONS: WEIGHT: ACCESSORIES: 2 balanced audio +4dBu/50k on XLR (F) connectors 10 balanced audio +4dBu/50 on XLR (M) connectors 23.8Vpp >100kHz 89.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution PN: 2900- 001030 Rev: 2 Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.
