Instruction Manual

Your VP-103 XGA Line Amp/Converter

4 Your VP-103 XGA Line Amp/Converter

Figure 1and Table 1 define the VP-103 XGA Line Amp/Converter:

Figure 1: VP-103 XGA Line Amp/Converter – Front and Rear View

Table 1: Features and Functions of the VP-103 XGA Line Amp/Converter

# Feature Function

1 POWER Switch Illuminated switch for turning the unit ON or OFF

2 G+S/G Pushbutton Press to select green + sync; release to select green at the

GREEN OUT BNC connectors

3 Hs ONLY/CS Pushbutton Press to select horizontal sync; release to select composite sync

at the CS/Hs OUT BNC connectors

4 CABLE EQ. knob Adjust the cable equalization level

5 LEVEL knob Adjust the video picture intensity level to correct the input signal

6 TERM Pushbutton Press when looping is not used; release to allow looping

7 ACTIVE LOOP HD15F connector Connects to a local display

8 INPUT HD15F connector Connects to a computers graphics source

9 RED BNC Connector

10 GREEN BNC Connector Connect to the RGB video acceptors

11 BLUE BNC Connector

12 CS/Hs BNC Connector Amplified and buffered horizontal sync (when the Hs/Cs

pushbutton is pressed) or composite sync (when the Hs/Cs

pushbutton is released)

OUT

Vs BNC Connector Amplified and buffered vertical sync output

14 12V DC +12V DC connector for powering the unit

1 For OUT 1 and OUT 2