User guide

Kramer Protocol 2000
41
INSTRUCTION DEFINITION FOR SPECIFIC INSTRUCTION
# DESCRIPTION INPUT OUTPUT
NOTE
19 STORE AUDIO STATUS Set as SETUP # 0 - to store
1 - to delete
2, 3
20 RECALL AUDIO STATUS Set as SETUP # 0 2, 3
21 SET VIDEO PARAMETER Equal to input / output number
whose video parameter is to be
set (0 = all)
Set as parameter value 2, 11, 23
22 SET AUDIO PARAMETER Equal to input / output number
whose gain is to be set (0 = all)
Set as parameter value 2, 11, 23
23 INCREASE / DECREASE
VIDEO PARAMETER
Equal to input / output number
whose video parameter is to be
increased / decreased (0 = all)
0 - increase video gain
1 - decrease video gain
2 - increase contrast
3 - decrease contrast
4 - increase brightness
5 - decrease brightness
6 - increase color
7 - decrease color
8 - increase hue
9 - decrease hue
16 - increase H-phase
17 - decrease H-phase
18 - increase V-position
19 - decrease V-position
23
24 INCREASE / DECREASE
AUDIO PARAMETER
Equal to input / output number
whose parameter is to be
increased / decreased (0 = all)
0 - increase output
1 - decrease output
2 - increase left output
3 - decrease left output
4 - increase right output
5 - decrease right output
6 - increase input
7 - decrease input
8 - increase left input
9 - decrease left input
10 - increase right input
11 - decrease right input
23
25 REQUEST AUDIO
PARAMETER
Equal to input / output number
whose parameter is requested
0 6, 23
26 REQUEST VIDEO
PARAMETER
Equal to input / output number
whose video parameter is
requested
0 6, 23
30 LOCK FRONT PANEL 0 - Panel unlocked
1 - Panel locked
0 2
31 REQUEST WHETHER
PANEL IS LOCKED
0 0 16
32 RESERVED - - - - - - - - 10
33 RESERVED - - - - - - - - 10
34 RESERVED - - - - - - - - 10
35 RESERVED - - - - - - - - 10
40 DIRECT MEMORY SAVE Memory address Data 20
42 AUDIO PARAMETER
SETTINGS FOR
INSTRUCTIONS 22, 24, 25
INPUT Bit:
I0 - 0=input; 1=output
I1 - Left
I2 - Right
0 - Gain
1 - Bass
2 - Treble
3 - Midrange
23
43 VIDEO PARAMETER
SETTINGS FOR
INSTRUCTIONS 21, 23, 26
1 – Input
2 – Output
0 - video gain
1 - contrast
2 - brightness
3 - color
4 - hue
4 - H-phase
5 - V-position
23
56 CHANGE TO ASCII 0 0 18
57 SET AUTO-SAVE I3 - no save
I4 - auto-save
0 12, 2
58 EXECUTE LOADED DATA Set as 0, or as SETUP # 1-Take
2-Cancel
21, 3
Set equal to video input
(0 = disconnect)
Set equal to video output
(0 = to all the outputs)
59 LOAD VIDEO DATA
(127 = load SETUP #) or SETUP #
21, 22