Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Flash Memory Upgrade

2. Do the following according to the sequence below:

 Connect the power cord and turn the POWER switch ON

 Set DIP 9 ON

 Set DIP 10 ON

 Set DIP 12 ON

 Set DIP 11 ON

 After a few seconds, set DIP 11 OFF

The front panel buttons may illuminate erratically. This is normal, and should

be ignored.

8.3 Upgrading Firmware

Follow these steps to upgrade the firmware:

1. Double click the desktop icon: “ Shortcut to FLIP.EXE”.

The Splash screen appears as follows:

Figure 15: Splash Screen

2. After a few seconds, the Splash screen is replaced by the “ Atmel – Flip”

window: