Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your XGA / Audio Switcher
6
Table 3: Front Panel VP-161xl 16x1 XGA / Audio Switcher Features
# Feature Function
1 IR Receiver The red LED is illuminated when receiving signals from
the Kramer Infra-red remote control transmitter
2 POWER Switch Illuminated switch supplying power to the unit
3 INPUT SELECTOR Buttons Select the input to switch to the output (from 1 to 16)
4 AUDIO Button When illuminated
1
actions relate to audio
5 VIDEO Button When illuminated
1
actions relate to video
Table 4: Rear Panel VP-161xl 16x1 XGA / Audio Switcher Features
# Feature Function
6 REMOTE Terminal Block Connectors Connect to the remote contact-closure switches
7 AUDIO OUTPUT Terminal Block
Connector
Connect to the balanced audio acceptor
8 AUDIO INPUTS Terminal Block
Connectors
Connect to the balanced audio sources (from 1 to 16)
9 RS-232 IN DB 9F Port Connects to the PC or RS-232 remote controller
10 RS-232 OUT DB 9M Port Connects to the RS-232 IN DB 9F port of the next unit
in the daisy-chain
11 RS-485 Detachable Terminal Block Port Pin # 1 is for Ground connection, and Pins # 2 and # 3
are for RS-485
12 Power Connector with FUSE AC connector enabling power supply to the unit
13 SETUP Dipswitches Dipswitches for setup of the unit
14 INPUT HD15F Connectors Connect to the VGA/XGA sources (from 1 to 16)
15 ID BIT Switch Selects the ID BIT when switched ON (when outputting
the input signal from a notebook connected to an
external VGA monitor)
2
16 OUTPUT HD15F Connector Connects to the VGA/XGA acceptor
1 If the AUDIO and VIDEO buttons both illuminate, the unit operates in the audio-follow-video mode. If only one button
illuminates (AUDIO or VIDEO), the unit operates in the breakaway mode
2 Sometimes notebook computers refuse to output a VGA signal to an external VGA monitor if they do not detect the ID BIT
as ON. Set the ID BIT to ON using this button so that the notebook will output to an external VGA monitor