Datasheet

200K

1:2 Computer Graphics Video Distribution Amplifier

The VP−200K is a distribution amplifier for

computer graphics signals up to and

exceeding UXGA. The unit takes one input,

provides correct buffering and isolation, and

distributes the signal to two identical

outputs.

High Bandwidth

400MHz (−3dB).

HDTV Compatible.

ID Bit Control.

Kr-isp® Advanced Sync Processing

Ensures compatibility with a wide range of computers (even if the sync level is

too low) by restoring the sync signal waveform. Kr−isp® advanced sync processing can be enabled or disabled.

EDID PassThru

Passes EDID signal from display to source via output 1.

Selectable Sync Input Impedance

75Ω(video),510Ω(Graphics/TTL).

DC Coupling.

3ft 15-pin HD Cable Included.

Compact Kramer TOOLS™

3 units can be rack mounted side−

−side in a 1U rack space with the optional RK−3T

rack adapter.

FEATURES

PAGE 1
VP-200K 1:2 Computer Graphics Video Distribution Amplifier The VP−200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs. FEATURES High Bandwidth - 400MHz (−3dB). HDTV Compatible. ID Bit Control.
PAGE 2
VP-200K TECHNICAL SPECIFICATIONS INPUT: 1 UXGA on an 15−pin HD connector. OUTPUTS: 2 UXGA on 15−pin HD connectors. MAX. OUTPUT LEVEL: 2.2Vpp. BANDWIDTH (-3dB): 400MHz. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 72dB @5MHz. CONTROLS: ID BIT switch; analog/TTL switches for setting the sync. COUPLING: DC. POWER SOURCE: 5V DC, 130mA. DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx.