Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting the VP-200XLTHD

3. Connect the LINE OUT RJ-45 connector on the VP-200XLTHD to the LINE IN

RJ-45 connector on the TP-120 via STP cabling (see Section

8.1).

4. Connect the 12V DC power adapter to the power socket on the VP-200XLTHD

and plug the adapter into the mains electricity socket.

5. Connect the other 12V DC power adapter to the power socket on the TP-120, and

plug the adapter into the mains electricity socket.

6. On the VP-200XLTHD, if required, use a screwdriver to adjust the:

 Video output signal level

 Cable compensation equalization level

7. On the TP-120, if required:

 Adjust

the video output signal level and/or cable compensation

equalization level

 On the underside, set the H SYNC and V SYNC switches

Figure 7: Connecting the VP-200XLTHD

1 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level

2 By default, both switches are set down (for normal V SYNC and H SYNC polarity)