User guide

VP-28 - Connecting the VP-28 13

5.2.2 Connecting to the Ethernet Port via a Network Switch/Hub

To connect to the Ethernet port on the VP-28 via a network switch/hub:

• Connect the PC to the Ethernet network switch/hub using a straight through

cable

5.3 Connecting a Balanced/Unbalanced Stereo Audio Output

This section illustrates how to wire:

• A balanced stereo audio connection, see

Figure 6

• An unbalanced stereo audio output connection, see

Figure 7

Figure 6: Balanced Stereo

Audio Output Connection

Figure 7: Unbalanced

Stereo Audio Output

Connection