User guide

24 VP-28 - Operating the VP-28 Remotely
7.9 Upgrading the Firmware
To upgrade the firmware:
1. Download the latest firmware file from
http:www.kramerelectronics.com.
2. Click Device > Firmware Upgrade.
3. Browse to the firmware file that you downloaded.
4. Click Open.
The device firmware is loaded.
Note: Do not interrupt the uploading process or the device may be
damaged.
5. When the process is complete power cycle the device.
7.10 Setting the IP Network Parameters
To set the IP network parameters:
1. Click Device > Device Details.
2. Under Connectivity, edit the required parameter as shown in
Figure 18.