User manual

6
VP-422 - Overview
#
Feature
Function
1
AUDIO OUTPUT
RCA Connectors
L
Connect to an unbalanced analog stereo acceptor
2
R
IR LED
Lights red when the unit accepts IR remote commands
3
PC OUTPUT 15-pin HD
connector
Connect to computer graphics or HDTV acceptor
4
HDMI INPUT Connector
Connect to an HDMI source
The HDMI source must not have HDCP encryption – if copy
protection is detected, the unit’s output will be switched off
5
5V DC
+5V DC connector for powering the unit
6
ON LED
Lights green when the unit is powered on
7
COMPONENT OUT LED
Lights blue when component video is output and also
during factory reset
8
MENU button
Press to enter/escape the on-screen display (OSD) menu.
Press together with the – button to reset to 720p
9
ENTER button
In the OSD, press to choose the highlighted menu item.
Press together with the + button to reset to XGA
10
– /AUTO ADJUST button
In the OSD, press to move down through the list or to
decrement the parameter value. When not in the OSD,
press to automatically adjust the picture to fit the display
11
+/FREEZE button
In the OSD, press to move forward through the list or to
increment the parameter value.
When not in the OSD, press to freeze the display